FreePlywood balance trainerDraft
Balance trainer 36
One rail made of 1 to 5 stacked plywood layers on two single-layer feet. Top thickness determines the height.
- Dimensions
- 400 × 300 × 36 mm
- Top layers
- 1 × 18 mm
MyGonka / Parkour
Parkour
Equipment
Working 3D models, drawings and assembly notes. Everything is free to download; each model shows its current readiness status.
Models
27 / 27Free
FreePlywood balance trainerDraft
Balance trainer 54
One rail made of 1 to 5 stacked plywood layers on two single-layer feet. Top thickness determines the height.
- Dimensions
- 400 × 300 × 54 mm
- Top layers
- 2 × 18 mm
FreePlywood balance trainerDraft
Balance trainer 72
One rail made of 1 to 5 stacked plywood layers on two single-layer feet. Top thickness determines the height.
- Dimensions
- 400 × 300 × 72 mm
- Top layers
- 3 × 18 mm
FreePlywood balance trainerDraft
Balance trainer 90
One rail made of 1 to 5 stacked plywood layers on two single-layer feet. Top thickness determines the height.
- Dimensions
- 400 × 300 × 90 mm
- Top layers
- 4 × 18 mm
FreePlywood balance trainerDraft
Balance trainer 108
One rail made of 1 to 5 stacked plywood layers on two single-layer feet. Top thickness determines the height.
- Dimensions
- 400 × 300 × 108 mm
- Top layers
- 5 × 18 mm
FreePlywood balance trainerDraft
Balance trainer 1525 · 54 mm
A 1525 mm balance trainer on three supports with 2 bonded layers of 18 mm plywood, 54 mm high.
- Dimensions
- 1525 × 300 × 54 mm
- Top layers
- 2 × 18 mm
FreePlywood balance trainerDraft
Balance trainer 1525 · 72 mm
A 1525 mm balance trainer on three supports with 3 bonded layers of 18 mm plywood, 72 mm high.
- Dimensions
- 1525 × 300 × 72 mm
- Top layers
- 3 × 18 mm
FreePlywood balance trainerDraft
Balance trainer 1525 · 90 mm
A 1525 mm balance trainer on three supports with 4 bonded layers of 18 mm plywood, 90 mm high.
- Dimensions
- 1525 × 300 × 90 mm
- Top layers
- 4 × 18 mm
FreePlywood balance trainerDraft
Balance trainer 1525 · 108 mm
A 1525 mm balance trainer on three supports with 5 bonded layers of 18 mm plywood, 108 mm high.
- Dimensions
- 1525 × 300 × 108 mm
- Top layers
- 5 × 18 mm
FreePlywood blockDraft
Block 1000
A square low block on a uniform 3 × 3 grid of 50 × 50 mm timber, with a pair of two-hand carry slots on the front and back walls.
- Dimensions
- 1000 × 1000 × 500 mm
- Material
- 18 mm plywood + 50 × 50 mm
FreePlywood block, no timberDraft
Block 1000 finger-jointed
The same block in plywood only: box joints on the edges and two crossing tab-and-slot ribs inside.
- Dimensions
- 1000 × 1000 × 500 mm
- Material
- 18 mm plywood
FreePlywood block, no timberDraft
Block 1500 × 1000 finger-jointed
A long block in plywood only: box joints on the edges, three cross ribs and one lengthwise tab-and-slot rib inside.
- Dimensions
- 1500 × 1000 × 500 mm
- Material
- 18 mm plywood
FreePlywood blockDraft
Block 1525 × 1000
A low block on a 5 × 3 grid of 50 × 50 mm timber, with a pair of two-hand carry slots on the long walls.
- Dimensions
- 1525 × 1000 × 500 mm
- Material
- 18 mm plywood + 50 × 50 mm
FreePlywood blockDraft
Block 2000
A low reversible block on a symmetrical 5 × 3 grid of 50 × 50 mm timber; two pairs of two-hand carry slots on each long wall for a four-person carry.
- Dimensions
- 2000 × 1000 × 500 mm
- Material
- 18 mm plywood + 50 × 50 mm
FreePlywood blockDraft
Block 1525
A low block sized to a whole plywood sheet on a 5 × 4 grid of 50 × 50 mm timber, with a pair of two-hand carry slots on the front and back walls.
- Dimensions
- 1525 × 1525 × 500 mm
- Material
- 18 mm plywood + 50 × 50 mm
FreePlywood cubeDraft
Cube 1525
A fully clad cube on a symmetrical 50 × 50 mm timber frame.
- Dimensions
- 1525 × 1525 × 1525 mm
- Material
- 18 mm plywood + 50 × 50 mm
FreePlywood discDraft
Disc 100
A flat round stepping target cut from 18 mm plywood. One part with no handles or hardware; lay the discs out on the floor in any pattern.
- Dimensions
- Ø100 × 18 mm
- Material
- 18 mm plywood
FreePlywood discDraft
Disc 200
A flat round stepping target cut from 18 mm plywood. One part with no handles or hardware; lay the discs out on the floor in any pattern.
- Dimensions
- Ø200 × 18 mm
- Material
- 18 mm plywood
FreePlywood discDraft
Disc 300
A flat round stepping target cut from 18 mm plywood. One part with no handles or hardware; lay the discs out on the floor in any pattern.
- Dimensions
- Ø300 × 18 mm
- Material
- 18 mm plywood
FreePlywood discDraft
Disc 400
A flat round stepping target cut from 18 mm plywood. One part with no handles or hardware; lay the discs out on the floor in any pattern.
- Dimensions
- Ø400 × 18 mm
- Material
- 18 mm plywood
FreePlywood discDraft
Disc 500
A flat round stepping target cut from 18 mm plywood. One part with no handles or hardware; lay the discs out on the floor in any pattern.
- Dimensions
- Ø500 × 18 mm
- Material
- 18 mm plywood
FreePlywood disc stepDraft
Disc 400 + 4 × 300
A Ø400 disc with four Ø300 discs glued centrally on top: a 90 mm step with a 50 mm ledge all round.
- Dimensions
- Ø400 / Ø300 × 90 mm
- Material
- 18 mm plywood
FreeTrapezoidDraft
Trapezoid 300
A compact fixed trapezoid with a flat base, two handholds per end and four cross panels.
- Dimensions
- 300 × 1200 × 800 mm
- Material
- 18 mm plywood
FreeTrapezoidDraft
Trapezoid 600
A lower fixed trapezoid with a flat base and four cross panels.
- Dimensions
- 600 × 1200 × 1000 mm
- Material
- 18 mm plywood
FreeTrapezoidDraft
Trapezoid 900
A fixed trapezoid with a flat base, internal ribs and floor protection.
- Dimensions
- 900 × 1200 × 1050 mm
- Material
- 18 mm plywood
FreePlywood wedgeDraft
Triangle 500
A 500 × 500 × 500 mm wedge with a 45° slope, one inner rib and handholds in the side walls.
- Dimensions
- 500 × 500 × 500 mm
- Material
- 18 mm plywood
FreePlywood wedgeDraft
Triangle 1000
A shallow wedge: legs 1000 and 500 mm, 500 mm wide, about a 25.6° slope, two handholds in each side wall.
- Dimensions
- 1000 × 500 × 500 mm
- Material
- 18 mm plywood